Aerating Jets create a rigid, frothy column of water. These nozzles have a long, admired history being extremely popular over the past years mainly due to the fact that they are the most efficient foam-creating nozzles.
The inner design of Aerating Jets makes excellent use of water flow to transform it to foam. The air-water mixture is easily adjusted, offering a highly customizable water pattern. Fixing the outer sleeve higher makes the mixture richer in air and thus a frothier but shorter effect is created. By lowering it, a higher but leaner stream is achieved.
Aerating jets are now constructed of AISI 304 stainless steel or 316 on request, making them an ideal solution for a customizable, super-efficient, low cost, long lasting frothy fountain.
The handy suction screen accessory is made of stainless steel as well and it is highly recommended to prevent debris from clogging the nozzle’s air intakes.
- Rigid & Frothy Column of Water
- Super-Efficient Nozzle
- Customizable Water Effect
- Made of Stainless Steel
- Integrated Swivel Ball Joint
- Water Level Dependent Nozzle
- Water supply to the jet must be linear, non-turbulent
- Highly efficient nozzle due to the Stainless Steel friction-less internal surface
Application Inspiration:
Project Spotlight
University of Central Florida, USA
Situated at the heart of UCF in Orlando – FL, the water feature of the campus serves as an iconic symbol for generations of students. Officials have chosen Fontana Aerating Jets and colorful Fontana lights to modernize and make the fountain “ready for its next 50 years” — a promise that only Fontana equipment could fulfill.
Technical Specifications
| MA 080 | MA 102 | MA 103 | MA 104 | MA 105 | MA 107 | MA 108 | MA 110 | |
| Material | Stainless Steel AISI 304 & Brass |
|||||||
| Inlet BSP/NPT | ¾″ | 1″ | 1″ | 1½″ | 2″ | 3″ | 4″ | DN 100 |
| Nozzle Orifice | 18 mm | 24 mm | 29 mm | 41 mm | 52 mm | 69 mm | 80 mm | 102 mm |
| Dimensions |
280 x 150 | 250 x 185 | 280 x 210 | 345 x 265 | 400 x 300 | 510 x 380 | 565 x 430 | 640 x 456 |
| Integrated Swivel | Male ±15° | Male ±15° | Male ±15° | Male ±15° | Female ±5° | Female ±5° | Female ±5° | Flange |
| Suction Strainer Openings Required | 2.0 mm | 3.0 mm | 3.0 mm | 4.0 mm | 4.0 mm | 5.0 mm | 10.0 mm | 10.0 mm |
| Spray Height ▼ | Flow | Head [Lpm] | [m] |
Flow | Head [Lpm] | [m] |
Flow | Head [Lpm] | [m] |
Flow | Head [Lpm] | [m] |
Flow | Head [Lpm] | [m] |
Flow | Head [Lpm] | [m] |
Flow | Head [Lpm] | [m] |
Flow | Head [Lpm] | [m] |
| 1.0 m | 13 | 5.0 | 23 | 4.8 | ||||||
| 2.0 m | 22 | 12.8 | 34 | 7.8 | 39 | 5.4 | 51 | 4.4 | 83 | 4.2 | |||
| 3.0 m | 27 | 20.4 | 43 | 12.5 | 61 | 10.3 | 71 | 7.3 | 99 | 5.2 | |||
| 4.0 m | 33 | 31.2 | 51 | 19.3 | 66 | 12.8 | 82 | 9.8 | 132 | 8.3 | |||
| 5.0 m | 61 | 24.3 | 75 | 18.3 | 92 | 13.2 | 146 | 11.3 | ||||
| 6.0 m | 67 | 30.0 | 77 | 19.7 | 105 | 18.3 | 169 | 14.3 | ||||
| 8.0 m | 77 | 40.0 | 101 | 30.0 | 113 | 21.4 | 200 | 18.1 | 498 | 22.9 | |||
| 10.0 m | 87 | 50.0 | 118 | 41.8 | 143 | 31.4 | 236 | 26.5 | 532 | 25.3 | |||
| 15.0 m | 153 | 68.0 | 185 | 53.8 | 294 | 43.5 | 589 | 30.3 | 748 | 27.3 | 1415 | 24.3 | ||
| 20.0 m | 351 | 65.8 | 683 | 42.5 | 919 | 39.8 | 1598 | 33.1 | ||||
| 25.0 m | 428 | 85.3 | 779 | 56.8 | 1086 | 51.8 | 1878 | 43.7 | ||||
| 30.0 m | 917 | 73.0 | 1183 | 64.3 | 2088 | 52.5 | |||||
| 35.0 m | 1011 | 89.7 | 1365 | 93.5 | 2280 | 63.7 | |||||
Downloads
You can download any of the following files for your own personal use. Information contained in these files might change without prior notice. Copy in part or in whole, as well as reproduction, publication, distribution or any other use are strictly prohibited without written consent by Fontana.